NETGEAR GS108Tv3 User Manual Download Page 78 | Manualshive

Page: 78 / 492

NETGEAR GS108Tv3 User Manual Download Page 78

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Configure System Information

User Manual

78

7.

To refresh the page, click the

Update

button.

The following table displays the nonconfigurable daylight saving status information.

Table 16. Daylight Saving (DST) Status information

Field

Description

Daylight Saving (DST)

The Daylight Saving value, which is one of the following:

• Disable

• Recurring

• Recurring

EU

• Recurring

USA

• Non

Recurring

Begins At

The start date of daylight saving time. This field is not displayed when
daylight saving time is disabled.

Ends At

The end date of daylight saving time. This field is not displayed when
daylight saving time is disabled.

Offset (in Minutes)

The offset value in minutes.This field is not displayed when daylight saving
time is disabled.

Zone

The zone acronym. This field is not displayed when daylight saving time is
disabled.

Daylight Saving (DST) in Effect

Indicates whether daylight saving time is in effect.

Configure denial of service settings

You can configure the denial of service (DoS) settings for the switch. The switch provides
support for classifying and blocking specific types of DoS attacks.

Configure Auto-DoS

You can automatically enable all the DoS features available on the switch, except for the L4
Port attack. For information about the types of DoS attacks the switch can monitor and block,
see

Configure denial of service on page

To enable the Auto-DoS feature:

1.

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.

2.

Launch a web browser.

3.

In the address field of your web browser, enter the IP address of the switch.

«
...
76
77
78
79
80
...
»

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments