NETGEAR GS108Tv3 User Manual Download Page 457

Page: 457 / 492

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Maintain or Troubleshoot the Switch

User Manual

457

Click the

Login

button.

The System Information page displays.

Select

Maintenance > Troubleshooting > Traceroute IPv4

In the

IP Address/Hostname

field, enter the IP address or host name of the device for

which the path must be discovered.

In the

Probes Per Hop

field, enter the number of probes per hop.

The default value is 3. The range is 1 to 10.

In the

Max TTL

field, enter the maximum time to live (TTL) for the destination.

The default value is 30. The range is 1 to 255.

10.

In the

Init TTL

field, enter the initial TTL to be used.

The default value is 1. The range is 1 to 255.

11.

In the

MaxFail

field, enter the maximum number of failures allowed in the session.

The default value is 5. The range is 1 to 255.

12.

In the

Interval (secs)

field, enter the time between probes in seconds.

The default value is 3. The range is 1 to 60.

13.

In the

Port

field, enter the UDP destination port for the probe packets.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Search results

Summary of Contents for GS108Tv3

Reviews:

NETGEAR GS108Tv3, User Manual, Page: 457 / 492

Search results

Summary of Contents for GS108Tv3

Reviews: