manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 404 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 404

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

404

7. 

To delete an IP ACL-to-interface binding, do the following:

a.

Select the check box next to the interface.

b. 

Click the 

Delete

 button.

The binding is removed.

The following table describes the information displayed in the IP ACL binding table.

Table 73.  IP ACL Binding Table

 

Field

Description

Interface

The interface.

Direction

The selected packet filtering direction for the ACL, which is always Inbound.

ACL Type

The type of ACL assigned to the selected interface and direction.

ACL ID

The ACL number or name identifying the ACL assigned to the selected interface and 
direction.

Sequence Number

The sequence number signifying the order of the specified ACL relative to other ACLs 
assigned to the selected interface and direction.

Configure VLAN ACL bindings

You can associate a MAC ACL, any type of IPv4 ACL, or an IPv6 ACL with a VLAN. When 
you do so, the ACL is applied to all interfaces that are members of the VLAN.

Add a VLAN ACL binding

To add a VLAN ACL binding:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments