manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 410 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 410

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Monitor the Switch and the Traffic 

User Manual

410

Receive Packets Discarded

The number of inbound packets that were chosen to be discarded, even though 
no errors were detected, in order to prevent their being delivered to a 
higher-layer protocol. A possible reason for discarding a packet could be to free 
up buffer space.

Octets Transmitted

The total number of octets transmitted out of the interface, including framing 
characters.

Packets Transmitted Without 
Errors

The total number of packets transmitted out of the interface.

Unicast Packets Transmitted

The total number of packets that higher-level protocols requested be 
transmitted to a subnetwork-unicast address, including those that were 
discarded or not sent.

Multicast Packets 
Transmitted

The total number of packets that higher-level protocols requested be 
transmitted to a multicast address, including those that were discarded or not 
sent.

Broadcast Packets 
Transmitted

The total number of packets that higher-level protocols requested be 
transmitted to the broadcast address, including those that were discarded or not 
sent.

Transmit Packets Discarded

The number of outbound packets that were chosen to be discarded, even 
though no errors were detected, in order to prevent their being delivered to a 
higher-layer protocol. A possible reason for discarding a packet could be to free 
up buffer space.

Most Address Entries Ever 
Used

The highest number of Forwarding Database Address Table entries that were 
learned by this switch since the most recent reboot.

Address Entries in Use

The number of learned and static entries in the Forwarding Database Address 
Table for this switch.

Maximum VLAN Entries

The maximum number of VLANs allowed on this switch.

Most VLAN Entries Ever 
Used

The largest number of VLANs that were active on this switch since the last 
reboot.

Static VLAN Entries

The number of active VLAN entries on this switch that were created statically.

VLAN Deletes

The number of VLANs on this switch that were created and then deleted since 
the last reboot.

Time Since Counters Last 
Cleared

The elapsed time, in days, hours, minutes, and seconds, since the statistics for 
this switch were last cleared.

Table 74.  Switch statistics (continued)

Field

Description

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments