NETGEAR GS108Tv3 User Manual Download Page 39 | Manualshive

Page: 39 / 492

NETGEAR GS108Tv3 User Manual Download Page 39

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Get Started

User Manual

39

The following occurs:

•

The first time that you enable this mode, the switch is reset to its factory default
settings.

•

The switch connects to the cloud server.

•

If you previously added the switch to a network on the Insight app or Insight Cloud
portal, all Insight-manageable device settings are returned to the last configuration
saved on the cloud server, including the switch password (that is, the password is
reset to the Insight network password).

•

The NETGEAR Business page displays again. (You can close the page.)

You can now manage the switch using the Insight app or Insight Cloud portal.

For more information about NETGEAR Insight, visit

netgear.com/insight

netgear.com/support/product/Insight.aspx

. For knowledge base articles about NETGEAR

Insight, visit

netgear.com/support

Change the management mode back to Directly Connect

to Web-browser Interface

To change the management mode of the switch back to Directly Connect to Web
Browser Interface:

1.

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.

2.

Launch a web browser.

3.

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page

Access the switch off-network on page

.

The login page displays.

If the NETGEAR Business page displays, see

Register and access the switch with your

NETGEAR account on page

4.

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.

For information about the credentials, see

Credentials for the local browser interface on

5.

Click the

Login

button.

«
...
37
38
39
40
41
...
»

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments