manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 214 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 214

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

214

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Switching

> Multicast > IGMP Snooping Querier > Querier VLAN Status

.

7. 

To refresh the page with the latest information about the switch, click the 

Update

 button.

The following table describes the nonconfigurable information displayed on the page.

Table 45.  Querier VLAN Status information

 

Field

Description

VLAN ID

The VLAN ID on which IGMP snooping querier is administratively enabled and the 
VLAN exists in the VLAN database.

Operational State

The operational state of the IGMP snooping querier on a VLAN. It can be in any of 
the following states:

• Querier

. The snooping switch is the querier in the VLAN. The snooping switch 

sends out periodic queries with a time interval equal to the configured querier 
query interval. If the snooping switch finds a better querier in the VLAN, it 
moves to non-querier mode.

• Non-Querier

. The snooping switch is in non-querier mode in the VLAN. If the 

querier expiry interval timer expires, the snooping switch moves into querier 
mode.

• Disabled

. The snooping querier is not operational on the VLAN. The snooping 

querier moves to disabled mode when IGMP snooping is not operational on 
the VLAN or when the querier address is not configured or the network 
management address is also not configured.

Operational Version

The operational IGMP protocol version of the querier.

Last Querier Address

The IP address of the last querier from which a query was snooped on the VLAN.

Last Querier Version

The IGMP protocol version of the last querier from which a query was snooped on 
the VLAN.

Operational Max Response 
Time

The maximum response time to be used in the queries that are sent by the 
snooping querier.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments