8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Manage Device Security
User Manual
306
4.
Enter one of the following passwords:
•
After registration, enter the local device password.
By default, the local device password is
password
.
•
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
5.
Click the
Login
button.
The System Information page displays.
6.
Select
Security > Management Security > RADIUS > Accounting Server Configuration
.
7.
In the
Accounting Server Address
field, specify the IP address of the RADIUS accounting
server to add.
8.
In the
Port
field, specify the UDP port number that the server uses to verify the RADIUS
accounting server authentication. The default UDP port number is 1813.
9.
From the
Secret Configured
menu, select
Yes
to add a RADIUS secret in the next field.
You must select
Yes
before you can configure the RADIUS secret. After you add the
RADIUS accounting server, this field indicates whether the shared secret for this server
was configured.
10.
In the
Secret
field, type the shared secret to use with the specified accounting server.
11.
From the
Accounting Mode
menu, select
Enable
to enable the RADIUS accounting mode.
12.
Click the
Apply
button.
Your settings are saved.
13.
To reset the accounting server and RADIUS statistics to their default values, click the
Clear
Counters
button.