manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 353 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 353

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

353

Note:

After you enable port security for individual ports (see 

Configure a port 

security interface on page

 

353

), you can return to this page and click 

the 

Update

 button to refresh the page with the latest information about 

the ports.

The Port Security Violations table shows information about violations that occurred on ports 
that are enabled for port security. 

The following table describes the fields in the Port Security Violations table.

Table 68.  Port Security Violations information

 

Field

Description

Port

The physical interface.

Last Violation MAC

The source MAC address of the last packet that was discarded at a locked port.

VLAN ID

The VLAN ID corresponding to the last MAC address violation.

Configure a port security interface

A MAC address can be defined as allowed on a port by one of two methods: dynamically or 

statically. Both methods can occur concurrently when a port is locked.

Dynamic locking implements a first arrival mechanism for port security. You specify how 
many addresses can be learned on the locked port. If the limit is not reached, a packet with 
an unknown source MAC address is learned and forwarded normally. If the limit is reached, 
no more addresses are learned on the port. Any packets with source MAC addresses that 
were not already learned are dropped.

Static locking allows you to specify a list of MAC addresses that are allowed on a port. The 
behavior of packets is the same as for dynamic locking: only packets with an allowable 
source MAC address can be forwarded.

To configure a port security interface:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments