manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 434 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 434

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Monitor the Switch and the Traffic 

User Manual

434

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Monitoring > Mirroring > Port Mirroring

.

7. 

Select an Admin Mode radio button:

•

Disable

. Port mirroring is disabled. This is the default setting.

•

Enabled

. Port mirroring is enabled.

8. 

From the 

Destination Port 

menu, select the physical destination port to which port traffic 

must be copied. 

You can configure one destination port only. The port functions as a probe port and 
receives traffic from all configured source ports. If no port is configured, None is 
displayed. The default is None.

9. 

Click the 

Apply

 button.

Your settings are saved.

In the Source Interface Configuration section, perform the following steps.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments