8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Configure Switching
User Manual
234
7.
Select whether to display physical interfaces, LAGs, or both by clicking one of the following
links above the table heading:
•
1
(the unit ID of the switch). Only physical interfaces are displayed. This is the default
setting.
•
LAG
. Only LAGs are displayed.
•
All
. Both physical interfaces and LAGs are displayed.
8.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the port, or type
the port number in the
Go To Interface
field and click the
Go
button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
9.
From the
Keep Alive
menu, select
Enable
or
Disable
to specify whether keep-alives are
enabled on an interface.
The default is Enable.
10.
From the
RX Action
menu, select the action that occurs when the switch detects a loop on
an interface:
•
Log
. The switch logs a message.
•
Disable
. The switch disables the interface. This is the default action.
•
Both
. The switch both logs a message and disables the interface.
11.
Click the
Apply
button.
Your settings are saved.
12.
Click the
Clear
button to clear all the statistics in the table.
13.
Click the
Update
button to update the page to show the latest information.