manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 113 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 113

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

113

7. 

Select one or more interfaces by taking one of the following actions:

•

To configure a single interface, select the check box associated with the port, or type 
the port number in the 

Go To Interface

 field and click the 

Go

 button. 

•

To configure multiple interfaces with the same settings, select the check box 
associated with each interface. 

•

To configure all interfaces with the same settings, select the check box in the heading 
row.

8. 

Use the following menus to configure the LLDP settings for the selected ports:

•

Admin Status

. Select the status for transmitting and receiving LLDP packets:

-

Tx Only

. Enable only transmitting LLDP PDUs on the selected ports.

-

Rx Only

. Enable only receiving LLDP PDUs on the selected ports.

-

Tx and Rx

. Enable both transmitting and receiving LLDP PDUs on the selected 

ports.

-

Disabled

. Do not transmit or receive LLDP PDUs on the selected ports.

The default is Tx and Rx.

•

Management IP Address

. Choose whether to advertise the management IP address 

from the interface. The possible field values are as follows:

-

Stop Advertise

. Do not advertise the management IP address from the interface.

-

Auto Advertise

. Advertise the current IP address of the device as the 

management IP address.

The default is 

Auto Advertise

.

•

Notification

. When notifications are enabled, LLDP interacts with the trap manager to 

notify subscribers of remote data change statistics. The default is Disable.

•

Optional TLVs

. Enable or disable the transmission of optional type-length value (TLV) 

information from the interface. The default is Enable. The TLV information includes 
the system name, system description, system capabilities, and port description. 

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments