manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 307 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 307

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

307

The following table describes the RADIUS server statistics displayed on the page.

Table 62.  RADIUS accounting server statistics information

 

Field

Description

Accounting Server Address

The accounting server associated with the statistics.

Round Trip Time (secs)

The time interval, in hundredths of a second, between the most recent 
accounting-response and the accounting-request that matched it from this 
RADIUS accounting server.

Accounting Requests

The number of RADIUS accounting-request packets sent not including 
retransmissions.

Accounting Retransmissions

The number of RADIUS accounting-request packets retransmitted to this 
RADIUS accounting server.

Accounting Responses

The number of RADIUS packets received on the accounting port from this 
server.

Malformed Accounting Responses The number of malformed RADIUS accounting-response packets received 

from this server. Malformed packets include packets with an invalid length. 
Bad authenticators and unknown types are not included as malformed 
accounting responses.

Bad Authenticators

The number of RADIUS accounting-response packets that contained invalid 
authenticators received from this accounting server.

Pending Requests

The number of RADIUS accounting-request packets sent to this server that 
did not yet time out or receive a response.

Timeouts

The number of accounting time-outs to this server.

Unknown Types

The number of RADIUS packets of unknown type that were received from 
this server on the accounting port.

Packets Dropped

The number of RADIUS packets that were received from this server on the 
accounting port and dropped for some other reason.

Modify the settings for a RADIUS accounting server on the switch

To modify the settings for a RADIUS accounting server on the switch:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments