NETGEAR GS108Tv3 User Manual Download Page 120

Page: 120 / 492

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Configure System Information

User Manual

120

If no information was received from a neighbor device, or if the link partner is not
LLDP-enabled, no information displays.

The following table describes the information that displays for all LLDP neighbors that
were discovered.

Field

Description

MSAP Entry

The Media Service Access Point (MSAP) entry number for the remote
device.

Local Port

The interface on the local system that received LLDP information from a
remote system.

Chassis ID Subtype

The type of data displayed in the Chassis ID field on the remote system.

Chassis ID

The remote 802 LAN device’s chassis.

Port ID Subtype

The type of data displayed in the remote system’s Port ID field.

Port ID

The physical address of the port on the remote system from which the data
was sent.

System Name

The system name associated with the remote device. If the field is blank, the
name might not be configured on the remote system.

To view additional information about the remote device, click the link in the MSAP Entry
column.

A pop-up window displays information for the selected port.

The following table describes the information transmitted by the neighbor.

Field

Description

Port Details

Local Port

The interface on the local system that received LLDP information from a
remote system.

MSAP Entry

The Media Service Access Point (MSAP) entry number for the remote device.

Basic Details

Chassis ID Subtype

The type of data displayed in the Chassis ID field on the remote system.

Chassis ID

The remote 802 LAN device’s chassis.

Port ID Subtype

The type of data displayed in the remote system’s Port ID field.

Port ID

The physical address of the port on the remote system from which the data
was sent.

Port Description

The user-defined description of the port.

System Name

The system name associated with the remote device.

System Description

The description of the selected port associated with the remote system.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Search results

Summary of Contents for GS108Tv3

Reviews:

NETGEAR GS108Tv3, User Manual, Page: 120 / 492

Search results

Summary of Contents for GS108Tv3

Reviews: