NETGEAR GS108Tv3 User Manual Download Page 361

Page: 361 / 492

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Manage Device Security

User Manual

361

12.

As a sample, the following steps describe how you can create an ACL based on the

destination MAC address:

In the

Destination MAC

field, specify the destination MAC address that must be

compared against the information in an Ethernet frame.

The format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a
destination MAC address of 01:80:C2:xx:xx:xx.

In the

Destination MAC Mask

field, specify the destination MAC address mask that

must be compared against the information in an Ethernet frame.

The format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a
destination MAC mask of 00:00:00:ff:ff:ff.

In the

VLAN ID

field, specify which VLAN must be compared against the information

in an Ethernet frame.

The range is from 1 to 4093. Either a VLAN range or VLAN can be configured.

13.

In the Binding Configuration section, from the

Direction

menu, select the packet filtering

direction for the ACL.

Only the inbound direction is valid.

14.

In the Ports and LAG tables in the Binding Configuration section, select the ports and LAGs
to which the ACL must be applied.

15.

Click the

Add

button.

The rule is added to the ACL.

16.

Click the

Apply

button.

Your settings are saved.

Destination IPv6

• Destination

Prefix

. Specify the destination prefix.

• Destination

Prefix

Length

. Specify the destination prefix length.

Source IPv6

• Source

Prefix

. Specify the source destination prefix.

• Source

Prefix

Length

. Specify the source prefix length.

Destination IPv4 L4 Port

• Destination L4 port (protocol)

. Specify the destination IPv4 L4 port

protocol.

• Destination L4 port (value)

. Specify the destination IPv4 L4 port value.

Source IPv4 L4 Port

• Source

port

(protocol)

. Specify the source IPv4 L4 port protocol.

• Source

port

(value)

. Specify the source IPv4 L4 port value.

Destination IPv6 L4 Port

• Destination L4 port (protocol)

. Specify the destination IPv6 L4 port

protocol.

• Destination L4 port (value)

. Specify the destination IPv6 L4 port value.

Source IPv6 L4 Port

• Source

port

(protocol)

. Specify the source IPv6 L4 port protocol.

• Source

port

(value)

. Specify the source IPv6 L4 port value.

ACL Based On

Fields

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Search results

Summary of Contents for GS108Tv3

Reviews:

NETGEAR GS108Tv3, User Manual, Page: 361 / 492

Search results

Summary of Contents for GS108Tv3

Reviews: