8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Configure System Information
User Manual
56
The login page displays.
If the NETGEAR Business page displays, see
Register and access the switch with your
.
4.
Enter one of the following passwords:
•
After registration, enter the local device password.
By default, the local device password is
password
.
•
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
5.
Click the
Login
button.
The System Information page displays.
6.
Select
System > Management > System CPU Status > CPU Threshold
.
7.
Specify the thresholds:
•
Rising Threshold
. Notification is generated when the total CPU utilization exceeds
this threshold value over the configured time period. The range is 1 to 100.
•
Rising Interval
. This utilization monitoring time period can be configured from 5 to
86400 seconds in multiples of 5 seconds.
•
Falling Threshold
. Notification is triggered when the total CPU utilization falls below
this level for a configured period of time.
The falling utilization threshold must be equal to or less than the rising threshold
value. The falling utilization threshold notification is sent only if a rising threshold
notification was sent previously. Configuring the falling utilization threshold and time
period is optional. If the Falling CPU utilization settings are not configured, the switch
uses the same values as the values that are used for the Rising CPU utilization. The
range is 1 to 100.
•
Falling Interval
. The utilization monitoring time period can be configured from
5
seconds to 86400 seconds in multiples of 5 seconds.
•
Free Memory Threshold
. The free memory threshold value for the CPU in KB.
8.
Click the
Apply
button.
Your settings are saved.