manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 225 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 225

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

225

•

Querier Address

. Enter an IP address. This address specifies the snooping querier 

address to be used as the source address in periodic MLD queries. This address is 
used when no address is configured on the VLAN on which a query is being sent. The 
supported IPv6 formats are x:x:x:x:x:x:x:x and x::x.

•

MLD Version

. Specify the MLD protocol version used in periodic MLD queries.

•

Query Interval (secs)

. Specify the interval in seconds between periodic queries sent 

by the snooping querier. The query interval must be a value in the range of 1 to 1800. 
The default value is 60.

•

Querier Expiry Interval (secs)

. Specify the interval in seconds after which the last 

querier information is removed. The querier expiry interval must be a value in the 
range of 60 to 300. The default value is 60.

7. 

Click the 

Apply

 button. 

Your settings are saved.

The page displays VLAN IDs enabled for the MLD snooping querier.

Configure the MLD snooping querier VLAN settings

To configure the MLD snooping querier VLAN settings: 

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Switching

> Multicast > MLD Snooping > Querier VLAN Configuration

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments