manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 105 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 105

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

105

The System Information page displays.

6. 

Select 

System > SNMP > SNMP V1/V2 > Trap Configuration

.

The Trap Configuration page displays.

7. 

In the 

Recipients IP 

field, enter the IPv4 address at which the SNMP traps from the switch 

must be received.

8. 

From the 

Version 

menu, select the trap version to be used by the SNMP trap receiver. 

•

SNMPv1

. The switch uses SNMPv1 to send traps to the receiver. The default setting 

is SNMPv1.

•

SNMPv2

. The switch uses SNMPv2 to send traps to the receiver.

9. 

In the 

Community String 

field, specify the name of the SNMP community that includes 

the SNMP management host and the SNMP agent on the device.

This name can be up to 16 characters and is case-sensitive.

10. 

From the 

Status

 menu, select 

Enable

 to send traps to the receiver or select 

Disable

 to 

prevent the switch from sending traps to the receiver.

11. 

Click the 

Add

 button.

The receiver configuration is added.

Modify information about an existing SNMP trap recipient

To modify information about an existing SNMP trap recipient:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments