NETGEAR GS108Tv3 User Manual Download Page 141

Page: 141 / 492

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Configure Switching

User Manual

141

The frame size includes the Ethernet header, CRC, and payload. The range is 1522 to
10000. The default maximum frame size is 1522.

Select whether to display physical interfaces, LAGs, or both by clicking one of the following
links above the table heading:

•

(the unit ID of the switch). Only physical interfaces are displayed. This is the default

setting.

•

LAG

. Only LAGs are displayed.

•

All

. Both physical interfaces and LAGs are displayed.

Select one or more interfaces by taking one of the following actions:

•

To configure a single interface, select the check box associated with the port, or type
the port number in the

Go To Interface

field and click the

button.

•

To configure multiple interfaces with the same settings, select the check box
associated with each interface.

•

To configure all interfaces with the same settings, select the check box in the heading
row.

10.

In the

Description

field, enter the description string to be attached to a port.

The string can be up to 64 characters in length.

11.

From the

Admin Mode

menu, select

Enable

Disable

This selection specifies the administrative mode for port control. You must select

Enable

in order for the port to participate in the network. The default is Enable.

12.

From the

Autonegotiation

menu, select

Enable

Disable

This selection specifies the autonegotiation mode for the port. The default is Enable.

Note:

After you change the autonegotiation mode, the switch might be
inaccessible for a number of seconds while the new settings take effect.

13.

In the

Speed

field, specify the speed value for the selected port.

Possible field values are as follows:

•

Auto

. All supported speeds.

•

. 10 Mbits/second.

•

100

. 100 Mbits/second.

•

1000

. 1000 Mbits/second.

The delimiter characters for setting different speed values are a comma (,), a period (.)
and a space ( ). The default is Auto.

Note:

After you change the speed value, the switch might be inaccessible for
a number of seconds while the new settings take effect.

14.

From the

Duplex Mode

menu, select the duplex mode for the selected port.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Search results

Summary of Contents for GS108Tv3

Reviews:

NETGEAR GS108Tv3, User Manual, Page: 141 / 492

Search results

Summary of Contents for GS108Tv3

Reviews: