manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 216 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 216

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

216

The System Information page displays.

6. 

Select 

Switching

> Multicast > MLD Snooping > Configuration

.

7. 

Select the MLD Snooping Admin Mode 

Enable

 radio button.

By default, the 

Disable

 radio button is selected.

8. 

Click the 

Apply

 button.

Your settings are saved.

9. 

To refresh the page with the latest information about the switch, click the 

Update

 button.

The following table describes the nonconfigurable MLD Snooping Configuration fields.

Table 46.  MLD Snooping Configuration information

 

Field

Definition

Multicast Control Frame Count

The number of multicast control frames that were processed by the CPU.

Interfaces Enabled for MLD 
Snooping

The interfaces on which MLD snooping is administratively enabled. MLD 
snooping must be enabled globally and on an interface for the interface to 
be able to snoop MLD packets to determine which segments must receive 
multicast packets directed to the group address.

VLAN IDs Enabled For MLD 
Snooping

The VLANs on which MLD snooping is administratively enabled.

Configure MLD snooping for interfaces

To configure MLD snooping for interfaces:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments