manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 76 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 76

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

76

•

If you select the DayLight Saving (DST) 

Non Recurring 

radio button, the fields in the 

following table are visible and you must configure them.

Table 15.  Daylight saving setting is Non Recurring

 

Field

Description

Begins At

These fields are used to configure the start values of the date and time.

• Month

. Configure the start month.

• Date

. Configure the start date in the month.

• Year

. Configure the start year.

• Hours

. Configure the start hour.

• Minutes

. Configure the start minutes.

Ends At

These fields are used to configure the end values of date and time. 

• Month

. Configure the end month.

• Date

. Configure the end date in the month.

• Year

. Configure the end year.

• Hours

. Configure the end hour.

• Minutes

. Configure the end minutes.

Offset 

Specify the number of minutes to shift the summer time from the standard time. 
The range is from 1 to 1440 minutes.

Zone 

Specify the acronym associated with the time zone when summer time is in 
effect. This field is not validated against an official list of time zone acronyms.

9. 

Click the 

Apply

 button.

Your settings are saved.

Ends At

These fields are used to configure the end values of date and time. 

• Week

. Configure the end week in the month.

• Day

. Configure the end day in the week.

• Month

. Configure the end month.

• Hours

. Configure the end hour.

• Minutes

. Configure the end minutes.

Offset 

Configure recurring offset in minutes. The range is from 1 to 1440 minutes.

Zone 

Configure the time zone.

Table 14.  Daylight saving setting is Recurring, Recurring EU, or Recurring USA 

Field

Description

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments