manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 320 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 320

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

320

6. 

Select 

Security > Access > HTTP > HTTP Configuration

.

7. 

In the 

HTTP Session Soft Timeout

 field, specify the number of minutes an HTTP session 

can be idle before a time-out occurs.

The value must be in the range from 0 to 60 minutes. The default value is 5 minutes.

After the session is inactive for the configured time, you are automatically logged out and 

must reenter the password to access the local browser interface A value of zero means 
that the session does not time out.

8. 

In the 

HTTP Session Hard Timeout

 field, specify the hard time-out for HTTP sessions. 

This time-out is unaffected by the activity level of the session. The value must be in the 
range from 0 to 168 hours. A value of zero means that the session does not time out. The 
default value is 24 hours.

9. 

In the 

Maximum Number of HTTP Sessions

 field, specify the maximum number of HTTP 

sessions that can exist at the same time.

The range is from 1 to 4 sessions. The default is 4 sessions.

10. 

Click the 

Apply

 button. 

Your settings are saved.

Configure HTTPS access settings

Secure HTTP (HTTPS) enables the transmission of HTTP over an encrypted Secure Sockets 
Layer (SSL) or Transport Layer Security (TLS) connection. When you manage the switch 
over the local browser interface, HTTPS can help ensure that communication between the 
management system and the switch is protected from eavesdroppers and man-in-the-middle 
attacks. The hash algorithms that SSL uses are MD5 and SHA-1. By default, HTTPS access 
is enabled on the switch.

To configure HTTPS access settings:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments