8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Manage Device Security
User Manual
369
13.
From the
Match Every
menu, select whether each Layer 2 MAC packet must be matched
against the rule:
•
True
. Each packet must match the selected ACL rule.
•
False
. Not all packets need to match the selected ACL rule.
14.
In the
CoS
field, specify the 802.1p user priority that must be compared against the
information in an Ethernet frame.
The range for the priority is from 0 to 7.
15.
In the
Destination MAC
field, specify the destination MAC address that must be compared
against the information in an Ethernet frame.
The format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a destination
MAC address of 01:80:C2:xx:xx:xx.
16.
In the
Destination MAC Mask
field, specify the destination MAC address mask that must
be compared against the information in an Ethernet frame.
The format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a destination
MAC mask of 00:00:00:ff:ff:ff.
17.
From the
EtherType Key
menu, select the EtherType value that must be compared against
the information in an Ethernet frame.
The values are as follows:
•
Apple Talk
•
IBM SNA
•
IPv4
•
IPv6
•
IPX
•
MPLS Multicast
•
MPLS Unicast
•
NetBios
•
Novell
•
PPPOE
•
RARP
•
User Value
18.
If you select
User Value
from the
EtherType Key
menu, in the
EtherType User Value
field,
specify the customized EtherType value that must be used.
This value must be compared against the information in an Ethernet frame. The range is
from 0x0600 to 0xFFFF.
19.
In the
Source MAC
field, specify the source MAC address that must be compared against
the information in an Ethernet frame.
The format is xx:xx:xx:xx:xx:xx.