manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 197 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 197

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

197

7. 

In the 

Search by MAC Address

 field, enter a MAC address. 

Enter six two-digit hexadecimal numbers separated by colons, for example 
00:01:23:43:45:67. 

8. 

Click the 

Go

 button.

If the address exists, the entry is displayed. An exact match is required.

9. 

To refresh the page with the latest information about the switch, click the 

Update

 button.

10. 

To clear all multicast forwarding address entries, click the 

Clear

 button.

Table 41.  MFDB table information

 

Field

Description

MAC Address

The multicast MAC address for which you requested data.

VLAN ID

The VLAN ID to which the multicast MAC address is related.

Type

The type of the entry. Static entries are those that are configured by the end user. 
Dynamic entries are added to the table as a result of a learning process or protocol.

Component

The component that is responsible for this entry in the Multicast Forwarding Database. 
The options are IGMP snooping, GMRP, Static Filtering, and MLD snooping.

Description

The text description of this multicast table entry. The options are Management 
Configured, Network Configured, and Network Assisted.

Forwarding Interfaces

The resultant forwarding list is derived from combining all the forwarding interfaces and 
removing the interfaces that are listed as the static filtering interfaces.

View the MFDB statistics

To view the MFDB statistics: 

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments