manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 115 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 115

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

115

The page refreshes and displays the data transmitted in the network policy TLVs for the 
interface. 

The following table describes the LLDP-MED network policy information that displays on the 
page.

Table 24.  LLDP-MED network policy information

 

Field

Description

Network Policy Number

The policy number.

Application

The media application type associated with the policy, which can be one of the 
following:

• 

Unknown

• 

Voice

• 

Guest Voice

• 

Guest Voice Signaling

• 

Softphone Voice

• 

Video Conferencing

• 

Streaming Video

• 

Video Signaling

A port can receive multiple application types. The application information is 

displayed only if a network policy TLV was transmitted from the port.

VLAN ID

The VLAN ID associated with the policy.

VLAN Type

Indicates whether the VLAN associated with the policy is tagged or untagged.

User Priority

The priority associated with the policy.

DSCP

The DSCP associated with a particular policy type.

Configure the LLDP-MED port settings

You can enable the LLDP-MED mode on a port and configure its properties. 

To configure the LLDP-MED settings for a port:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments