manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 122 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 122

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

122

Configure DHCP snooping

DHCP snooping is a useful feature that provides security by filtering untrusted DHCP 
messages and by building and maintaining a DHCP snooping binding table. An untrusted 
message is a message that is received from outside the network or firewall and that can 
cause traffic attacks within your network. The DHCP snooping binding table contains the 
MAC address, IP address, lease time, binding type, VLAN number, and interface information 
that corresponds to the local untrusted interfaces of a switch. An untrusted interface is an 
interface that is configured to receive messages from outside the network or firewall. A 
trusted interface is an interface that is configured to receive only messages from within the 
network.

Model Name 

The model name advertised by the remote device.

Asset ID

The asset ID advertised by the remote device.

Location Information 

Civic

The physical location, such as the street address, that the remote device 
advertised in the location TLV, for example, 123 45th St. E. The field value 
length range is 6–160 characters.

Coordinates

The location map coordinates that the remote device advertised in the 
location TLV, including latitude, longitude, and altitude.

ECS ELIN

The Emergency Call Service (ECS) Emergency Location Identification 
Number (ELIN) that the remote device advertised in the location TLV. The 
field range is 10–25.

Unknown

The unknown location information for the remote device.

Network Policies

Application Type

The media application type associated with the policy advertised by the 
remote device.

VLAN ID

The VLAN ID associated with the policy.

VLAN Type

Specifies whether the VLAN associated with the policy is tagged or untagged.

User Priority

The priority associated with the policy.

DSCP

The DSCP associated with a particular policy type.

LLDP Unknown TLVs

Type

The unknown TLV type field.

Value

The unknown TLV value field.

Field

Description 

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments