manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 422 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 422

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Monitor the Switch and the Traffic 

User Manual

422

Perform a cable test

You can test and view information about the cables that are connected to switch ports.

To perform a cable test:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

EAPOL Start Frames 
Received

The number of EAPoL start frames that were received by this authenticator.

EAPOL Logoff Frames 
Received

The number of EAPoL logoff frames that were received by this authenticator.

EAPOL Last Frame Version

The protocol version number carried in the most recently received EAPoL frame.

EAPOL Last Frame Source

The source MAC address carried in the most recently received EAPoL frame.

EAPOL Invalid Frames 
Received

The number of EAPoL frames that were received by this authenticator in which 
the frame type is not recognized.

EAPOL Length Error Frames 
Received

The number of EAPoL frames that were received by this authenticator in which 
the frame type is not recognized.

EAP Response/ID Frames 
Received

The number of EAP response/identity frames that were received by this 
authenticator.

EAP Response Frames 
Received

The number of valid EAP response frames (other than resp/ID frames) that were 
received by this authenticator.

EAP Request/ID Frames 
Transmitted

The number of EAP request/identity frames that were transmitted by this 
authenticator.

EAP Request Frames 
Transmitted

The number of EAP request frames (other than request/identity frames) that 
were transmitted by this authenticator.

Table 77.  EAP statistics

Field

Description

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments