manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 163 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 163

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

163

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Switching

> VLAN > Advanced > Protocol Based VLAN Group Configuration

. 

7. 

In the 

Group ID

 field, enter a number to identify the group.

The number must be in the range from 1 to 128.

8. 

In the 

Group Name

 field, enter a name for the new group. 

You can enter up to 16 characters.

9. 

In the 

Protocol

 field, enter one or more protocols that must be associated with the group.

You can enter keywords such as arp, ip, and ipx. Separate keywords with a comma. You 
can also enter hexadecimal or decimal values in the range from 0x0600 (1536) to 
0xFFFF (65535).

10. 

In the 

VLAN ID

 field, enter the VLAN ID. 

The ID can be any number in the range from 1 to 4093. All the ports in the group assign 
this VLAN ID to untagged packets received for the protocols that you included in this 
group.

11. 

Click the 

Add

 button.

The protocol-based VLAN group is added to the switch.

The Ports field displays all the member ports that belong to the group.

Configure protocol-based VLAN group membership

To configure protocol-based VLAN group membership:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments