manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 34 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 34

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Get Started 

User Manual

34

Overview of the credentials for access to the local browser 

interface

The following table lists the essential credential options for access to the local browser 
interface.

Table 3.  Credentials for access to the local browser interface

 

Management mode

Registered with a 
NETGEAR account

Credentials

Local browser 
interface menu

Default mode: 
Direct Connect Web-browser Interface 
(Local LAN Only)

No

Local device password

Limited menu

Yes

Local device password

1

1. If you change the management mode from NETGEAR Insight Mobile App and Insight Cloud Portal to Direct Connect 

Web-browser Interface, you must continue to use the Insight network password (for the last Insight network location) to access 
the local browser interface until you manually change the local device password.

Full menu

NETGEAR Insight Mobile App and 
Insight Cloud Portal (Cloud/Remote)

No

Insight network password

Limited menu

Yes

Insight network password

Limited menu

2

2. You can manage the Insight features through the Insight app and Insight Cloud portal.

Register and access the switch with your 

NETGEAR account

You only need to register and access the switch local browser interface 

once

 with your 

NETGEAR account. After you do so, you can access the local browser interface with the local 
device password, or if you previously added the switch to an Insight network, with the Insight 
network password.

For initial registration and access with your NETGEAR account, the switch must be 
connected to the Internet so that it can communicate with a NETGEAR server.

If you do not own a free NETGEAR account, you can create one during the registration 
process.

To register and access the switch online over the local browser interface with your 
NETGEAR account:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments