manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 266 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 266

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Quality of Service 

User Manual

266

•

DSCP

. The six most significant bits of the DiffServ field are called the Differentiated 

Services Code Point (DSCP) bits.

10. 

In the 

Interface Shaping Rate

 field, specify the maximum outbound transmission rate 

bandwidth in kbps.

This setting is used to shape the outbound transmission rate in increments of 1 percent in 
a range of 0–100. This value is controlled independently of any per-queue maximum 
bandwidth configuration. It is effectively a second-level shaping mechanism. The default 
value is 0. The value 0 means that the maximum is unlimited. 

The expected shaping at egress interface is calculated as follows:

frameSize × shaping/(fra IFG), where IFG (Inter frame gap) is 20 bytes, 
frameSize is configured frame size, and shaping is configured traffic shaping. 

For example, if 64 bytes frame size and 64 kbps shaping are configured, the expected 
shaping is approximately 48 kbps.

11. 

In the 

Interface Ingress Rate Limit 

field, specify the maximum inbound transmission rate 

bandwidth in kbps.

This setting is used to shape the inbound transmission rate in increments of 1 percent in 
a range of 0–100. The interface discards traffic that arrives at a bandwidth in excess of 
the specified limit.

12. 

Click the 

Apply

 button. 

Your settings are saved.

Configure the CoS queue settings for an interface

You can define what a particular queue does by configuring switch egress queues. You can 
control how much bandwidth is used by the queue, the queue depth during times of 
congestion, and the scheduling of packet transmission from all queues on a port. Each port 
contains its own CoS queue-related configuration.

For information about configuring CoS queue settings globally, see 

Configure the global 

CoS settings on page

 

263

. 

To configure the CoS queue settings for an interface:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments