8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Configure Quality of Service
User Manual
265
If the NETGEAR Business page displays, see
Register and access the switch with your
4.
Enter one of the following passwords:
•
After registration, enter the local device password.
By default, the local device password is
password
.
•
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
5.
Click the
Login
button.
The System Information page displays.
6.
Select
QoS > CoS > Advanced > CoS Interface Configuration
.
7.
Select whether to display physical interfaces, LAGs, or both by clicking one of the following
links above the table heading:
•
1
(the unit ID of the switch). Only physical interfaces are displayed. This is the default
setting.
•
LAG
. Only LAGs are displayed.
•
All
. Both physical interfaces and LAGs are displayed.
8.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the port, or type
the port number in the
Go To Interface
field and click the
Go
button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
9.
From the
Interface Trust Mode
menu, select one of the following trust mode options for
ingress traffic on the selected interfaces:
•
Untrusted
. Do not trust any CoS packet marking at ingress.
•
802.1p
. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The
QoS setting lets you map each of the eight priority levels to one of seven internal
hardware priority queues. The default value is 802.1p.