8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Configure Switching
User Manual
150
packet can either reject it or insert a tag using its default VLAN ID. A port can handle traffic for
more than one VLAN, but it can support only one default VLAN ID.
You can define VLAN groups stored in the VLAN membership table. The switch supports up
to 64 VLANs.
The following VLANs are preconfigured on the switch and you cannot delete them:
•
VLAN 1
. The default VLAN of which all ports are members.
•
VLAN 4088
. The default Auto-VoIP VLAN. By default, this VLAN does not include any
members but you can manually add members.
•
VLAN 4089
. The Auto-Video VLAN. By default, this VLAN does not include any members
but you can manually add members.
Configure VLAN settings
You can configure the various VLAN settings.
Add a VLAN
To add a VLAN:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page
Access the switch off-network on page
The login page displays.
If the NETGEAR Business page displays, see
Register and access the switch with your
.
4.
Enter one of the following passwords:
•
After registration, enter the local device password.
By default, the local device password is
password
.
•
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
5.
Click the
Login
button.
The System Information page displays.
6.
Select
Switching
> VLAN > Basic > VLAN Configuration
.