NETGEAR GS108Tv3 User Manual Download Page 345

Page: 345 / 492

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Manage Device Security

User Manual

345

The previous figure shows the MAC Filter Configuration page for model GS110TPv3.

From the

MAC Filter

menu, select

Create Filter

If you did not configure any filters, this is the only option available.

From the

VLAN ID

menu, select the VLAN that must be used with the MAC address.

In the

MAC Address

field, specify the MAC address of the filter in the format

XX:XX:XX:XX:XX:XX.

You cannot define filters for the following MAC addresses:

•

00:00:00:00:00:00

•

01:80:C2:00:00:00 to 01:80:C2:00:00:0F

•

01:80:C2:00:00:20 to 01:80:C2:00:00:21

•

FF:FF:FF:FF:FF:FF

10.

In the Port and LAG tables in the Source Port Members section, select the ports and LAGs
that must be included in the inbound filter.

If a packet with the MAC address and VLAN ID that you specify is received on a port that
is not part of the inbound filter, the packet is dropped.

11.

In the Port and LAG tables in the Destination Port Members section, select the ports and
LAGs that must be included in the outbound filter.

A packet with the MAC address and VLAN ID that you specify can be transmitted only

from a port that is part of the outbound filter.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Search results

Summary of Contents for GS108Tv3

Reviews:

NETGEAR GS108Tv3, User Manual, Page: 345 / 492

Search results

Summary of Contents for GS108Tv3

Reviews: