manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 458 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 458

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Maintain or Troubleshoot the Switch 

User Manual

458

The default value is 33434. The range is 1–65535.

14. 

In the 

Size

 field, enter the size of the probe packets.

The default value is 0. The range is 38 to 32768.

15. 

From the 

Source

 menu, as an option, you can select the IP address or interface that must 

be used to send probe packets:

•

None

. The source address of the probe packet is the address of the default egress 

interface.

•

IP Address

. The source IP address that must be used when probe request packets 

are sent. With this selection, the 

IP Address

 field displays and you must enter the 

IPv4 address that must be used as the source.

•

Interface

. The interface that must be used when probe request packets are sent. The 

Interface

 menu displays, but the only available selection from the menu is 

Network

.

16. 

Click the 

Apply

 button.

A traceroute request is sent to the specified IP address or host name. The results are 

displayed below the configurable data in the Results field.

Send an IPv6 traceroute

You can configure the switch to send a traceroute request to a specified IPv6 address or host 
name. You can use this to discover the paths that packets take to a remote destination. 
When you send a traceroute, the switch displays the results below the configurable data.

If a reply to the traceroute is received, the following message displays:

traceroute to x:y::z:w (x:y::z:w), maxTTL hops max, size byte packets

initTTL x:y::z:w (x:y::z:w) 0.000 ms * 0.000 ms

1 x:y::z:w (x:y::z:w) 0.000 ms * 0.000 ms

2 x:y::z:w (x:y::z:w) 0.000 ms * 0.000 ms

To send an IPv6 traceroute:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments