manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 264 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 264

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Quality of Service 

User Manual

264

By default, the 

Global

 radio button is selected.

•

To configure the same CoS trust mode settings for all CoS configurable interfaces, do 
the following:

a. 

Select the 

Global

 radio button.

b. 

From the 

Global Trust Mode

 menu, select one of the following trust mode 

options for ingress traffic on the switch:

-

Untrusted

. Do not trust any CoS packet marking at ingress.

-

802.1p

. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. 

The QoS setting lets you map each of the eight priority levels to one of eight 
internal hardware priority queues. The default mode is 802.1p.

-

DSCP

. The six most significant bits of the DiffServ field are called the 

Differentiated Services Code Point (DSCP) bits.

•

To configure CoS settings per interface, do the following:

a. 

Select the 

Interface

 radio button.

b. 

From the 

Interface Trust Mode

 menu, select one of the following trust mode 

options:

-

Untrusted

. Do not trust any CoS packet marking at ingress.

-

802.1p

. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. 

The QoS setting lets you map each of the eight priority levels to one of seven 
internal hardware priority queues. The default mode is 802.1p.

-

DSCP

. The six most significant bits of the DiffServ field are called the 

Differentiated Services Code Point (DSCP) bits.

8. 

Click the 

Apply

 button.

Your settings are saved.

Configure the CoS settings for an interface

You can configure the trust mode for one or more interfaces and apply an interface shaping 
rate to all interfaces or to a specific interface.

To configure the CoS settings for an interface:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments