manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 204 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 204

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

204

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Switching

> Multicast > IGMP Snooping > IGMP Snooping Table

.

The IGMP Snooping Table page displays.

7. 

In the 

Search By MAC Address

 field, specify the MAC address whose MFDB table entry 

you want to view. 

Enter six two-digit hexadecimal numbers separated by colons, for example 
00:01:23:43:45:67. 

8. 

Click the 

Go

 button.

If the address exists, the entry is displayed. An exact match is required.

9. 

To refresh the page with the latest information about the switch, click the 

Update

 button.

10. 

To clear all multicast forwarding address entries that were created for IGMP snooping, 
click the 

Clear

 button.

The following table describes the information in the IGMP snooping table.

Table 44.  IGMP Snooping Table information

 

Field

Description 

MAC Address

The multicast MAC address for which the switch holds forwarding and/or filtering 
information. The format is six two-digit hexadecimal numbers that are separated 
by colons, for example, 01:00:5e:45:67:89.

VLAN ID

The VLAN ID for which the switch holds forwarding and filtering information. 

Type

The type of the entry. Static entries are those that are configured by the end 
user. Dynamic entries are added to the table as a result of a learning process or 
protocol.

Description

The text description of this multicast table entry. The options are Management 
Configured, Network Configured, and Network Assisted.

Interface

The interfaces that are designated for forwarding (Fwd) and filtering (Flt) for the 
associated address.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments