manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 110 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 110

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

110

The SNMPv3 Access Mode field is a read-only field that shows the access privileges for 
the user account. Access for the admin account is always Read/Write. Access for all 
other accounts is Read Only.

7. 

To enable authentication, select an Authentication Protocol radio button.

You can select the 

MD5

 radio button or the 

SHA

 radio button. With either of these 

options, the user login password is used as SNMPv3 authentication password. For 
information about how to configure the login password, see 

Change the local device 

password for the local browser interface on page

 

298

.

8. 

To enable encryption:

a.

Select the Encryption Protocol 

DES 

radio button to encrypt SNMPv3 packets using 

the DES encryption protocol.

b. 

In the 

Encryption Key

 field, enter an encryption code of eight or more alphanumeric 

characters.

9. 

Click the 

Apply

 button.

Your settings are saved.

Configure Link Layer Discovery Protocol

The IEEE 802.1AB-defined standard, Link Layer Discovery Protocol (LLDP), allows stations 
on an 802 LAN to advertise major capabilities and physical descriptions. A network manager 
can view this information to identify system topology and detect bad configurations on the 
LAN.

LLDP is a one-way protocol without any request/response sequences. Information is 
advertised by stations implementing the transmit function, and is received and processed by 
stations implementing the receive function. The transmit and receive functions can be 
enabled or disabled separately per port. By default, both transmit and receive are disabled on 
all ports. The application is responsible for starting each transmit and receive state machine 
appropriately, based on the configured status and operational state of the port.

The Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED) is an 
enhancement to LLDP with the following features:

•

Autodiscovery of LAN policies (such as VLAN, Layer 2 priority, and DiffServ settings), 

enabling plug and play networking.

•

Device location discovery for creation of location databases.

•

Extended and automated power management of Power over Ethernet endpoints.

•

Inventory management, enabling network administrators to track their network devices 
and determine their characteristics (manufacturer, software and hardware versions, 
serial/asset number).

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments