manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 447 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 447

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Maintain or Troubleshoot the Switch 

User Manual

447

Note:

After you download a text configuration file, the switch applies the 
configuration automatically.

11. 

After you download a software image file, if you want the switch to run the software image, 

do the following:

a.

Select the new software image file (see 

Change the software image that loads when 

the switch starts or reboots on page

 

448

).

b. 

Reboot the switch (see 

Reboot the switch on page

 

437

).

Manage software images

The switch maintains two versions of the switch software in permanent storage. One image is 
the active image, and the second image is the backup image. The active image is loaded 
when the switch starts or reboots. This feature reduces switch down time when you are 
updating the switch software.

Note: 

A switch that runs an older (legacy) software version might not load a 

configuration file that is created by a newer software version. In such 
a situation, the switch displays a warning.

The following sections describe how you can manage the software images:

•

Copy a software image on page

 

447

•

Configure dual image settings on page

 

448

•

View the dual image status on page

 

451

Copy a software image

You can copy a software image from one location (primary or backup) to another.

To copy a software image:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments