NETGEAR GS108Tv3, User Manual, Page: 381 / 492

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual 381
• Match Every . Select one of the radio buttons to specify whether all packets must
match the selected IP ACL rule:
- Enable . All packets must match the selected IP ACL rule and are either permitted
or denied.
- Disable . Not all packets need to match the selected IP ACL rule.
• Interface . Select one of the radio buttons to specify whether all packets must be
mirrored or redirected:
- Mirror . From the menu, select the specific egress interface to which the matching
traffic stream must be copied, in addition to being forwarded normally by the
switch.
- Redirect . From the menu, select the egress interface to which the matching traffic
stream must be redirected, bypassing any forwarding decision normally
performed by the switch.
• Source IP Address . Enter an IP address using dotted-decimal notation to be
compared to a packet’s source IP address as a match criterion for the selected IP
ACL rule.
• Source IP Mask . Specify the IP mask in dotted-decimal notation to be used with the
source IP address value.
10. Click the Apply button.
Your settings are saved.
Modify the match criteria for a basic IPv4 ACL rule
To modify the match criteria for a basic IPv4 ACL rule:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 19
or
Access the switch off-network on page 30
.
The login page displays.
If the NETGEAR Business page displays, see
Register and access the switch with your
NETGEAR account on page 34
.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password .
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.