manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 293 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 293

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Quality of Service 

User Manual

293

The following table describes the nonconfigurable information displayed on the page.

Table 58.  Service Interface Configuration information

Field

Description

Direction

Shows the traffic direction of this service interface, which is always inbound (In).

Operational Status

Shows the operational status of this service interface (either Up or Down).

The operational status is shown as Up if all of the following conditions are true:

• 

The attached class is valid and includes at least one matching rule.

• 

The attached policy is valid and includes at least one attribute.

• 

The port is enabled, that is, the physical link of the port is in the 

up

 state.

Change the DiffServ policy for an interface

To change the DiffServ policy for an interface:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

QoS > DiffServ > Advanced > Service Configuration

.

The Service Interface Configuration page displays.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments