8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Manage Device Security
User Manual
310
If the NETGEAR Business page displays, see
Register and access the switch with your
.
4.
Enter one of the following passwords:
•
After registration, enter the local device password.
By default, the local device password is
password
.
•
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
5.
Click the
Login
button.
The System Information page displays.
6.
Select
Security > Management Security > > Configuration
.
7.
In the
Key String
field, specify the authentication and encryption key for
communications between the switch and the server.
The range is from 0 to 128. The key must match the key configured on the
server.
8.
In the
Connection Timeout
field, specify the maximum number of seconds allowed to
establish a TCP connection between the switch and the server.\
The range is from 1 to 30 seconds. The default is 5 seconds.
9.
Click the
Apply
button.
Your settings are saved.
Configure a server on the switch
You can configure up to three servers with which the switch can communicate.
To configure a server on the switch:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page