manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 94 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 94

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

94

The System Information page displays.

6.  Select System > PoE > Advanced > PoE Port Configuration

.

The previous figure shows the PoE Port Configuration page for model GS110TPv3.

The delivered power is stated in the Output Power (mW) column.

Activate the new PoE budget for an optional or 

replacement power adapter (model GS110TPP)

Model GS110TPP supports NETGEAR FlexPoE power. This feature allows for an 
interchangeable power adapter so that you can change your PoE power budget.

Model GS110TPP comes with a 130W power adapter that provides a PoE power budget of 
120W.

If you purchase and connect the NETGEAR optional power adapter model EPS200W, you 
can upgrade the PoE power budget to 190W. After you change the power adapter, you must 
use the local browser interface to activate the new power adapter that you connected to the 
switch.

Note: 

If you do not change the power adapter, you do not need to select the 

PoE budget and power adapter in the local browser interface. By 
default, the 130W power adapter is selected, and model GS110TPP 
provides a PoE power budget of 120W.

Perform the following task after you disconnect the old power adapter from the switch, 
connect the new power adapter to the switch, and start the switch.

To activate the new PoE budget for an optional or replacement power adapter on 
model GS110TPP:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments