manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 83 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 83

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

83

6. 

Select 

System > Management > DNS > DNS Configuration

.

7. 

Select the 

Disable

 or 

Enable

 radio button to specify whether to disable or enable the 

administrative status of the DNS client.

•

Enable

. Allows the switch to send DNS queries to a DNS server to resolve a DNS 

domain name. The DNS is enabled by default.

•

Disable

. Prevents the switch from sending DNS queries.

8. 

In the 

DNS Default Name

 field, enter the default DNS domain name to include in DNS 

queries. 

When the system is performing a lookup on an unqualified host name, this field is 
provides the domain name (for example, if default domain name is netgear.com and the 
user enters test, then test is changed to test.netgear.com to resolve the name). The name 
must not be longer than 255 characters.

9. 

In the 

DNS Server 

field, specify the IPv4 address to which the switch sends DNS queries.

10. 

Click the 

Add

 button. 

The server is added to the list. You can specify up to eight DNS servers. The Preference 
field displays the server preference order. The preference is set in the order in which 
preferences were entered.

11. 

Click the 

Apply

 button.

Your settings are saved.

The following table displays DNS Server Configuration information.

Table 17.  DNS Server Configuration information

Field

Description

ID

The identification of the DNS Server.

Preference

Shows the preference of the DNS server. The preferences are 
determined by the order in which they were entered.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments