manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 121 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 121

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

121

System Capabilities 

The system capabilities of the remote system.

Managed Addresses

Address SubType

The type of the management address. 

Address

The advertised management address of the remote system.

Interface SubType

The port subtype.

Interface Number

The port number on the remote device that sent the information.

MAC/PHY Details

Auto-Negotiation Supported Specifies whether the remote device supports port-speed autonegotiation. 

The option is True (enabled) or False (disabled).

Auto-Negotiation Enabled

The port speed autonegotiation support status. The option is True (enabled) 
or False (disabled).

Auto Negotiation Advertised 

Capabilities

The port speed autonegotiation capabilities.

Operational MAU Type

The Medium Attachment Unit (MAU) type. The MAU performs physical layer 
functions, including digital data conversion from the Ethernet interface 
collision detection and bit injection into the network.

MED Details 

Capabilities Supported 

The supported capabilities that were received in MED TLV from the device.

Current Capabilities 

The advertised capabilities that were received in MED TLV from the device.

Device Class 

The LLDP-MED endpoint device class. The possible device classes are as 
follows:

• 

Endpoint Class 1 indicates a generic endpoint class, offering basic LLDP 
services.

• 

Endpoint Class 2 indicates a media endpoint class, offering media 
streaming capabilities as well as all Class 1 features.

• 

Endpoint Class 3 indicates a communications device class, offering all 
Class 1 and Class 2 features plus location, 911, Layer 2 switch support, 
and device information management capabilities.

PoE Device Type

The port PoE type. For example, Powered.

PoE Power Source

The port’s power source.

PoE Power Priority

The port’s power priority.

PoE Power Value

The port’s power value.

Hardware Revision 

The hardware version advertised by the remote device.

Firmware Revision

The firmware version advertised by the remote device.

Software Revision 

The software version advertised by the remote device.

Serial Number 

The serial number advertised by the remote device.

Field

Description 

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments