manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 424 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 424

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Monitor the Switch and the Traffic 

User Manual

424

The following table describes the nonconfigurable information displayed on the page.

Table 78.  Cable Test information

 

Field

Description

Cable Status

Indicates the cable status:

• Normal

. The cable is working correctly.

• Open

. The cable is disconnected or a faulty connector exists.

• Short

. An electrical short exists in the cable. 

• Cable 

Test 

Failed

. The cable status could not be determined. The cable 

might in fact be working.

• Untested

. The cable is not yet tested.

• Invalid 

cable 

type

. The cable type is unsupported.

• No 

cable

. The cable is not present.

Cable Length

The estimated length of the cable in meters. The length is displayed as a range 
between the shortest estimated length and the longest estimated length. 
Unknown is displayed if the cable length could not be determined. The cable 
length is displayed only if the cable status is Normal.

Failure Location

The estimated distance in meters from the end of the cable to the failure 
location. The failure location is displayed only if the cable status is Open or 
Short.

Configure and view the logs

The switch generates messages in response to events, faults, or errors occurring on the 
platform as well as changes in configuration or other occurrences. These messages are 
stored locally and can be forwarded to one or more centralized points of collection for 
monitoring purposes or long-term archival storage. Local and remote configuration of the 
logging capability includes filtering of messages logged or forwarded based on severity and 
generating component.

Manage and view the memory log

The memory log stores messages in memory based upon the settings for message 
component and severity. You can set the administrative status and behavior of logs in the 
system buffer. These log messages are cleared when the switch reboots.

To manage and view the memory log:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments