manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 155 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 155

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

155

9. 

In the Ports table, click each port once, twice, or three times to configure one of the following 
modes or reset the port to the default mode:

•

T (Tagged)

. Selects the port as a tagged port in the VLAN. All frames transmitted on 

the port are tagged for this VLAN.

•

U (Untagged)

. Selects the port as an untagged port in the VLAN. All frames 

transmitted on the port are untagged for this VLAN.

•

Blank

. The port is excluded from the VLAN.

By default, the selection is blank and none of the ports are a member of the VLAN. 
(VLAN

 

1 is an exception. By default, all ports are untagged members of VLAN 1.)

However, ports can be dynamically registered (autodetected) in the VLAN through GVRP. 

10. 

In the LAG table, click each LAG once, twice, or three times to configure one of the following 
modes or reset the LAG to the default mode:

•

T (Tagged)

. Selects the LAG as a tagged LAG in the VLAN. All frames transmitted on 

the LAG are tagged for this VLAN.

•

U (Untagged)

. Selects the LAG as an untagged LAG in the VLAN. All frames 

transmitted on the LAG are untagged for this VLAN.

•

Blank

. The LAG is excluded from the VLAN.

By default, the selection is blank and none of the LAGs are a member of the VLAN. 
(VLAN

 

1 is an exception. By default, all LAGs are untagged members of VLAN

 

1.)

However, LAGs can be dynamically registered (autodetected) in the VLAN through 
GVRP. 

11. 

Click the 

Apply

 button.

Your settings are saved.

The following table describes the nonconfigurable information displayed on the page.

Table 29.  Advanced VLAN membership

Field

Definition

VLAN Name

The name for the VLAN that you selected. It can be up to 32 alphanumeric characters long, 
including blanks. The names for the following VLANs are predefined:

• VLAN 

1

. Default.

• VLAN 

4088

. Auto-VoIP.

• VLAN 

4089

. Auto-Video.

VLAN Type

The type of the VLAN you selected:

• Default

 (VLAN ID = 1). Always present.

• Static

. A VLAN that you configured.

• Dynamic

. A VLAN that is created through GVRP registration, that you did not convert to 

a static VLAN, and that GVRP can therefore remove.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments