8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Monitor the Switch and the Traffic
User Manual
423
By default, the local device password is
password
.
•
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
5.
Click the
Login
button.
The System Information page displays.
6.
Select
Monitoring > Ports > Cable Test
.
7.
Select one or more interfaces by taking one of the following actions:
•
To test a single interface, select the check box associated with the port, or type the
port number in the
Go To Interface
field and click the
Go
button.
•
To test multiple interfaces, select the check box associated with each interface.
•
To test all interfaces, select the check box in the heading row.
8.
Select the check boxes that are associated with the physical ports for which you want to test
the cables.
9.
Click the
Apply
button.
A cable test is performed on all selected ports. The cable test might take up to two
seconds to complete. If the port forms an active link with a device, the cable status is
always Normal. The test returns a cable length estimate if this feature is supported by the
PHY for the current link speed. Note that if the link is down and a cable is attached to a
10/100 Ethernet adapter then the cable status might be Open or Short because some
Ethernet adapters leave unused wire pairs unterminated or grounded.