manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 198 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 198

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

198

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Switching > Multicast > MFDB > MFDB Statistics

.

The MFDP Statistics page displays.

7. 

To refresh the page with the latest information about the switch, click the 

Update

 button.

The following table describes the MFDB Statistics fields.

Table 42.  MFDB Statistics information

 

Field 

Description

Max MFDB Table Entries

The maximum number of entries that the Multicast Forwarding Database 
table can hold (256 entries).

Most MFDB Entries Since Last 
Reset

The largest number of entries that were present in the Multicast Forwarding 
Database table since last reset. This value is also known as the MFDB 
high-water mark.

Current Entries

The current number of entries in the Multicast Forwarding Database table.

Configure the auto-video multicast settings

You can configure the auto-video multicast settings.

To configure auto-video multicast settings:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments