8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Configure Switching
User Manual
171
•
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
5.
Click the
Login
button.
The System Information page displays.
6.
Select
Switching > Auto-VoIP > Protocol-based > Port Settings
.
7.
In the Protocol Based Global Settings section, specify the following global settings:
a.
From the
Prioritization Type
menu, select
Traffic Class
or
Remark
.
This specifies the type of prioritization.
b.
From the
Class Value
menu, specify the CoS class value to be reassigned for packets
that the voice VLAN receives.
8.
In the Protocol Based Global Settings section, specify the Auto VoIP Mode settings:
a.
Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
•
1
(the unit ID of the switch). Only physical interfaces are displayed. This is the
default setting.
•
LAG
. Only LAGs are displayed.
•
All
. Both physical interfaces and LAGs are displayed.
b.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the port, or
type the port number in the
Go To Interface
field and click the
Go
button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the
heading row.