manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 101 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 101

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

101

Configure SNMP

You can configure SNMP settings for SNMPv1/v2 and SNMPv3. The switch software 
supports the configuration of SNMP groups and users that can manage traps that the SNMP 
agent generates.

The switch uses both standard public MIBs for standard functionality and private MIBs that 
support additional switch functionality. All private MIBs begin with a hyphen (-) prefix. The 
main object for interface configuration is in -SWITCHING-MIB, which is a private MIB. Some 
interface configurations also involve objects in the public MIB, IF-MIB.

Configure the SNMPv1 and SNMPv2 community

Only the communities that you define can access to the switch using the SNMP V1 and 
SNMP V2 protocols. Only those communities with read/write level access can be used to 
change the configuration using SNMP.

Add an SNMP community:

To add an SNMP community:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments