manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 411 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 411

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Monitor the Switch and the Traffic 

User Manual

411

View port statistics

You can view a summary of per-port traffic statistics on the switch.

To view port statistics:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Monitoring > Ports > Port Statistics

.

7. 

Select whether to display physical interfaces, LAGs, or both by clicking one of the following 
links above the table heading:

•

1 

(the unit ID of the switch). Only physical interfaces are displayed. This is the default 

setting.

•

LAG

. Only LAGs are displayed.

•

All

. Both physical interfaces and LAGs are displayed.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments